Slow startup and freezing graphics during program's start


(Johann Schmiedehausen) #1
Hardware information
$ hwinfo --short
cpu:
                       Intel(R) Celeron(R) M CPU        530  @ 1.73GHz, 1729 MHz
keyboard:
  /dev/input/event3    AT Translated Set 2 keyboard
mouse:
                       Logitech USB Optical Mouse
  /dev/input/mice      SynPS/2 Synaptics TouchPad
graphics card:
                       Intel Mobile GME965/GLE960 Integrated Graphics Controller
                       Intel 965 GME/GLE
sound:
                       Intel 82801H (ICH8 Family) HD Audio Controller
storage:
                       Intel 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
network:
  enp0s25              Intel 82562GT 10/100 Network Connection
                       Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN Controller
network interface:
  lo                   Loopback network interface
  enp0s25              Ethernet network interface
disk:
  /dev/sda             FUJITSU MHY2120B
partition:
  /dev/sda1            Partition
  /dev/sda2            Partition
  /dev/sda3            Partition
…
memory:
                       Main Memory
unknown:
                       FPU
                       DMA controller
                       PIC
                       Keyboard controller

$ inxi -Fzc 0
System:    Host: johann-pc Kernel: 4.18.12-1-CHAKRA x86_64 bits: 64 Desktop: KDE Plasma 5.14.2 Distro: Chakra 
Machine:   Type: Laptop System: Hewlett-Packard product: HP Compaq 6720s v: F.0B serial: <filter> 
           Mobo: Hewlett-Packard model: 30D8 v: KBC Version 83.0E serial: <filter> BIOS: Hewlett-Packard 
           v: 68MDU Ver. F.0B date: 06/20/2008 
CPU:       Topology: Single Core model: Intel Celeron M 530 bits: 64 type: MCP L2 cache: 1024 KiB 
           Speed: 1729 MHz min/max: N/A Core speed (MHz): 1: 1729 
Graphics:  Card-1: Intel Mobile GME965/GLE960 Integrated Graphics driver: i915 v: kernel 
           Display: x11 server: X.Org 1.20.3 driver: intel unloaded: modesetting,vesa resolution: 1280x800~60Hz 
           OpenGL: renderer: Mesa DRI Intel 965GME/GLE v: 2.1 Mesa 18.1.1 
Audio:     Card-1: Intel 82801H HD Audio driver: snd_hda_intel 
           Sound Server: ALSA v: k4.18.12-1-CHAKRA 
Network:   Card-1: Intel 82562GT 10/100 Network Connection driver: e1000e 
           IF: enp0s25 state: down mac: <filter> 
           Card-2: Broadcom BCM4311 802.11b/g WLAN driver: N/A 
Drives:    HDD Total Size: 111.79 GiB used: 85.09 GiB (76.1%) 
           ID-1: /dev/sda vendor: Fujitsu model: MHY2120BH size: 111.79 GiB 
Partition: ID-1: / size: 15.64 GiB used: 9.06 GiB (57.9%) fs: ext4 dev: /dev/sda2 
           ID-2: /home size: 89.22 GiB used: 76.03 GiB (85.2%) fs: ext4 dev: /dev/sda3 
           ID-3: swap-1 size: 5.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda1 
Sensors:   System Temperatures: cpu: 39.0 C mobo: 20.0 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 132 Uptime: 2h 51m Memory: 2.92 GiB used: 897.2 MiB (30.0%) Shell: bash inxi: 3.0.10 

Hi guys,
After the last update, I got some trouble.
I’ve installed the last iso three weeks ago. A -Syu did update some stuff, but at a point before qupzilla was replaced by falcon. I had to wait till the last update before it was possible to update to the up to date version.
To solve a problem avoiding me to reach the login-screen, I run the steps for solving the kernel panic issue, successfully.
Then I removed kde-runtime and kdelibs and all orphaned packages remained in the system.

But now, the start of every program takes a long while, in witch the display remains frozen till the program is fully loaded. That happens in all situations: loading login-screen, entering user account, open any program like konsole, dolphin or system settings. After the program is opened, all works quite fluently.

After the last update, the touchpad as well as the wifi-module does not work anymore.

Where I should start to look for problems?
I tried to make sure all drivers needed by graphics, wifi and input devices are installed. But like I’m new to Linux I may have done some error.


(Hans Tovetjärn) #2

Can you rephrase this? It makes no sense.

Provide your pacman configuration and log file instead of referring to a “recent” or a “latest” update.
The log file describes exactly what was upgraded, and from which version to which version. It is located at /var/log/pacman.log. The configuration files are located at /etc/pacman.conf and /etc/pacman.d/mirrorlist.conf.

Open Dolphin, navigate to /var/log, /etc, and /etc/pacman.d, and drag and drop the files into your post. Alternatively, click this button in the toolbar to upload files:

upload

Post the output of systemd-analyze, systemd-analyze blame, systemctl --failed, journalctl -b, and try running applications from Konsole.


(tom) #3

i would reconfigure the touchpad because libinput was upgraded and wifi is a always awful theme… wifi-module a related to the kernel.

/etc/pacman.conf and /etc/pacman.d/mirrorlist.conf are useless because it’s a fresh installed system but the pacman.log is very important and the output form systemctl --failed and from chakra-check-links

systemctl --failed
chakra-check-links

(Johann Schmiedehausen) #4

Okay, thanks a lot for the answers.

Here the logs. Let me say, I re-installed the system at mid-octuber 2018, even if the pacman log says different time…

pacman.log (212,6 KB)

here the outputs:

$ systemctl --failed
  UNIT                         LOAD   ACTIVE SUB    DESCRIPTION                                                                                                                   
● systemd-modules-load.service loaded failed failed Load Kernel Modules                                                                                                           

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

and

$ chakra-check-links
Checking libraries and binaries
 64%|																																						| 7515/11766 [01:22<00:46, 90.82it/s]
Warning: >> Could not open /usr/bin/cupsd; please check permissions
 88%|																																						| 10304/11766 [01:41<00:14, 101.87it/s]
Warning: >> Could not open /bin/cupsd; please check permissions
100%|																																						| 11766/11766 [01:47<00:00, 109.34it/s]
Determining broken packages
100%|																																						| 44/44 [00:19<00:00,  2.28it/s]

here the output file:
out.csv (6,3 KB)

I tried a short search in the internet for the meanig of these results, but havn’t found a lot…


(tom) #5

the output from chakra-check-links and pacman.log seems good but you must investigate why modules-load.service is failing.

please follow these instructions How to investigate systemd errors


(Johann Schmiedehausen) #6

Okay, I did the steps.
At first, I have to mention, that the TouchPad works since today. When I opened the configuration for the TouchPad it displayed a warning about differences between the saved and the active configuration. So I hit the apply button and got my configuration for the TouchPad back.

Well, now the investigation:

$ systemctl status systemd-modules-load
● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since Mon 2018-11-05 22:02:06 CET; 1h 2min ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
  Process: 257 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
 Main PID: 257 (code=exited, status=1/FAILURE)

Nov 05 22:02:06 johann-pc systemd[1]: Starting Load Kernel Modules...
Nov 05 22:02:06 johann-pc systemd-modules-load[257]: Failed to find module 'acpi_call'
Nov 05 22:02:06 johann-pc systemd-modules-load[257]: Failed to find module 'vhba'
Nov 05 22:02:06 johann-pc systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
Nov 05 22:02:06 johann-pc systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
Nov 05 22:02:06 johann-pc systemd[1]: Failed to start Load Kernel Modules.
$ journalctl _PID=257
-- Logs begin at Fri 2018-11-02 22:03:10 CET, end at Mon 2018-11-05 23:03:40 CET. --
Nov 05 22:02:06 johann-pc systemd-modules-load[257]: Failed to find module 'acpi_call'
Nov 05 22:02:06 johann-pc systemd-modules-load[257]: Failed to find module 'vhba'
$ ls -Al /etc/modules-load.d/
insgesamt 0
$

Here I stucked, because the directory /etc/modules-load.d/ is empty.
I tried to start the module insuccessfully, like expected. So I followed the instruction to get more info, here the outputs:

$ systemctl start systemd-modules-load
Job for systemd-modules-load.service failed because the control process exited with error code.
See "systemctl status systemd-modules-load.service" and "journalctl -xe" for details.
output of `systemctl status systemd-modules-load.service`
$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since Mon 2018-11-05 23:39:06 CET; 22s ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
  Process: 1527 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
 Main PID: 1527 (code=exited, status=1/FAILURE)

Nov 05 23:39:06 johann-pc systemd[1]: Starting Load Kernel Modules...
Nov 05 23:39:06 johann-pc systemd-modules-load[1527]: Failed to find module 'acpi_call'
Nov 05 23:39:06 johann-pc systemd-modules-load[1527]: Failed to find module 'vhba'
Nov 05 23:39:06 johann-pc systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
Nov 05 23:39:06 johann-pc systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
Nov 05 23:39:06 johann-pc systemd[1]: Failed to start Load Kernel Modules.
output of `journalctl -xe`
$ journalctl -xe
Nov 05 23:38:05 johann-pc kernel: R10: 0000000000000280 R11: 0000000000003246 R12: 00000000c05064a7
Nov 05 23:38:05 johann-pc kernel: R13: 000000000000000d R14: 00000000c05064a7 R15: 000055bc53cc8040
Nov 05 23:38:05 johann-pc kernel: ---[ end trace b2719dd290a3d580 ]---
Nov 05 23:38:15 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 05 23:38:25 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 05 23:38:26 johann-pc dbus-daemon[397]: Successfully activated service 'org.kde.Spectacle'
Nov 05 23:38:58 johann-pc polkitd[312]: Registered Authentication Agent for unix-process:1515:582488 (system bus name :1.43 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object>
Nov 05 23:38:58 johann-pc polkit-kde-authentication-agent-1[516]: Listener adapter polkit_qt_listener_initiate_authentication
Nov 05 23:38:58 johann-pc polkit-kde-authentication-agent-1[516]: GSimpleAsyncResult: 0x55a22f403600
Nov 05 23:38:58 johann-pc polkit-kde-authentication-agent-1[516]: polkit_qt_listener_initiate_authentication callback for  0x55a22f3b4680
Nov 05 23:38:58 johann-pc polkit-kde-authentication-agent-1[516]: Initiating authentication
Nov 05 23:38:58 johann-pc polkit-kde-authentication-agent-1[516]: Message of action:  "Legitimierung ist zum Starten von »systemd-modules-load.service« notwendig."
Nov 05 23:38:59 johann-pc polkit-kde-authentication-agent-1[516]: Action description has been found
Nov 05 23:38:59 johann-pc polkit-kde-authentication-agent-1[516]: WinId of the dialog is  31457286 31457286
Nov 05 23:38:59 johann-pc polkit-kde-authentication-agent-1[516]: WinId of the shown dialog is  31457286 31457286
Nov 05 23:38:59 johann-pc polkit-kde-authentication-agent-1[516]: Trying again
Nov 05 23:38:59 johann-pc polkit-kde-authentication-agent-1[516]: REQUEST
Nov 05 23:38:59 johann-pc polkit-kde-authentication-agent-1[516]: Request:  "Password: "
Nov 05 23:38:59 johann-pc polkit-kde-authentication-agent-1[516]: "Password: "
Nov 05 23:39:06 johann-pc polkit-kde-authentication-agent-1[516]: Dialog accepted
Nov 05 23:39:06 johann-pc polkit-kde-authentication-agent-1[516]: COMPLETED
Nov 05 23:39:06 johann-pc polkit-kde-authentication-agent-1[516]: Completed:  true
Nov 05 23:39:06 johann-pc polkit-kde-authentication-agent-1[516]: Finishing obtaining privileges
Nov 05 23:39:06 johann-pc polkit-kde-authentication-agent-1[516]: Listener adapter polkit_qt_listener_initiate_authentication_finish
Nov 05 23:39:06 johann-pc polkit-kde-authentication-agent-1[516]: polkit_qt_listener_initiate_authentication_finish callback for  0x55a22f3b4680
Nov 05 23:39:06 johann-pc polkitd[312]: Operator of unix-session:2 successfully authenticated as unix-user:henrietta to gain TEMPORARY authorization for action org.freedesktop.sy>
Nov 05 23:39:06 johann-pc systemd[1]: Starting Load Kernel Modules...
-- Subject: Unit systemd-modules-load.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-modules-load.service has begun starting up.
Nov 05 23:39:06 johann-pc polkit-kde-authentication-agent-1[516]: Finish obtain authorization: true
Nov 05 23:39:06 johann-pc systemd-modules-load[1527]: Failed to find module 'acpi_call'
Nov 05 23:39:06 johann-pc systemd-modules-load[1527]: Failed to find module 'vhba'
Nov 05 23:39:06 johann-pc systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
Nov 05 23:39:06 johann-pc systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
Nov 05 23:39:06 johann-pc systemd[1]: Failed to start Load Kernel Modules.
-- Subject: Unit systemd-modules-load.service has failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-modules-load.service has failed.
-- 
-- The result is RESULT.
Nov 05 23:39:06 johann-pc polkitd[312]: Unregistered Authentication Agent for unix-process:1515:582488 (system bus name :1.43, object path /org/freedesktop/PolicyKit1/Authenticat>
lines 980-1025/1025 (END)
^C

output journalctl -p err.txt (121,3 KB)

I hope some of these info will help…


(tom) #7

think you don’t need acpi-call and vhba

sudo pacman -R acpi-call

check if vhba is installed

pacman -Qs vhba

if, i would remove it

read post 61 https://bbs.archlinux.org/viewtopic.php?id=218581&p=3
this should solve the mass of kernel errors

perhaps in the next step we can solve your wifi problem


(Johann Schmiedehausen) #8

Okay, acpi-call seems to be not installed, the result of pacman - R acpi-call was target not found.

$ pacman - Qs vhba
local/vhba-module 20170610-16
    Kernel module that emulates SCSI devices
$ sudo pacman - R vhba
error: target not found: vhba

Well, following the post 61, I added video=SVIDEO-1:d to the first line beginning with GRUB_CMDLINE_LINUX_DEFAULT=. I run sudo update-grub and rebooted. There Was no change in the behavior. Is still freezing.
Here the grub file, with the actual changes: grub.txt (748 Bytes)

I haven’t tried to remove the xf86-video-intel package, like it is mentioned in the thread too, because I don’t know, whether I will be able to see anything without the graphics driver…


(gopona) #9

Just a small typo, acpi_call is the correct package name


(tom) #10

you can see the correct name is “vhba-module”^^

$ sudo pacman - R vhba-module

“video=SVIDEO-1:d” is outside the " "

GRUB_CMDLINE_LINUX_DEFAULT='quiet splash=silent logo.nologo acpi_osi=Linux video.use_native_backlight=1 audit=0'video=SVIDEO-1:d

this will work as expected

GRUB_CMDLINE_LINUX_DEFAULT='quiet splash=silent logo.nologo acpi_osi=Linux video.use_native_backlight=1 audit=0 video=SVIDEO-1:d'

this ’ important for the parser to recognize the begin end the end of your options for the kcmd so be careful


(Johann Schmiedehausen) #11

Okay, sorry for my mistake in the grub file and for my laziness in the other points.

Well, now I fixed the grub file and removed acpi_call. To remove the vhba-module I had to remove cdemu-daemon, as well as it’s client and optionally libmirage.

Now reboot again. All is slow as before (login takes more than ten minutes).

During booting, I noticed a change of the wifi module’s status LED. So I tested it, and it works fine again!


(tom) #12

the first success^^
are the kernel errors are gone?

it seems you are a victim from the “entropy bug”, haveged should easy this problem

sudo pacman -S haveged

and for the kcmd, add to grub

random.trust_cpu={on,off}
[KNL] Enable or disable trusting the use of the
			CPU's random number generator (if available) to
			fully seed the kernel's CRNG. Default is controlled
			by CONFIG_RANDOM_TRUST_CPU.

https://www.kernel.org/doc/Documentation/admin-guide/kernel-parameters.txt


(Johann Schmiedehausen) #13

I think the kernel error aren’t gone, like the the
[drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR*
and the
[drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR*
still appears in the output of journalctl -b.

output of systemd-analyze and systemctl --failed
$ systemd-analyze      
Startup finished in 3.470s (kernel) + 34.620s (userspace) = 38.090s
graphical.target reached after 11.677s in userspace
$ systemd-analyze blame
         25.738s updatedb.service
          4.501s dev-sda2.device
          2.812s upower.service
          2.733s shadow.service
          2.497s avahi-daemon.service
          2.496s systemd-logind.service
          2.492s NetworkManager.service
          2.446s logrotate.service
          1.529s systemd-journal-flush.service
           994ms systemd-udevd.service
           809ms systemd-rfkill.service
           779ms systemd-tmpfiles-setup-dev.service
           777ms systemd-tmpfiles-setup.service
           594ms dev-disk-by\x2duuid-50ba088b\x2d9743\x2d44d0\x2d86bf\x2d0540720164fd.swap
           587ms sys-kernel-debug.mount
           574ms dev-hugepages.mount
           535ms udisks2.service
           523ms systemd-remount-fs.service
           512ms dev-mqueue.mount
           499ms polkit.service
           480ms systemd-journald.service
           433ms systemd-udev-trigger.service
           332ms systemd-modules-load.service
           323ms org.cups.cupsd.service
           321ms home.mount
           303ms sys-kernel-config.mount
           274ms ntpd.service
           219ms systemd-user-sessions.service
           187ms systemd-random-seed.service
           155ms user@1000.service
           141ms systemd-update-utmp.service
           134ms rtkit-daemon.service
           114ms systemd-tmpfiles-clean.service
           104ms systemd-sysctl.service
            88ms kmod-static-nodes.service
            81ms wpa_supplicant.service
            80ms systemd-backlight@backlight:acpi_video0.service
            55ms alsa-restore.service
            55ms systemd-backlight@backlight:intel_backlight.service
            40ms tmp.mount
$ systemctl --failed
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

I installed haveged.

But what to do with

should I add random.trust_cpu=off to the same line in the grub configuration file, I have edited before? So that it would looks like this?

GRUB_CMDLINE_LINUX_DEFAULT='quiet splash=silent logo.nologo acpi_osi=Linux video.use_native_backlight=1 audit=0 video=SVIDEO-1:d random.trust_cpu=off'

(tom) #14

i would set random.trust_cpu=on have you haveged.service enabled?

these kernel errors are from the last boot? the journal is persistent and it’s possible that you see errors from a previous boot


(Johann Schmiedehausen) #15

Okay, grub is updated, haveged enabled. But it seems that there is no drastic change in the available entropy:

$ cat /proc/sys/kernel/random//entropy_avail
3119
$ cat /proc/sys/kernel/random//entropy_avail
2986
$ sudo systemctl start haveged
$ cat /proc/sys/kernel/random//entropy_avail
3131
$ cat /proc/sys/kernel/random//entropy_avail
3146
$ sudo systemctl enable haveged
Created symlink /etc/systemd/system/multi-user.target.wants/haveged.service → /usr/lib/systemd/system/haveged.service.
$ sudo systemctl stop haveged
$ cat /proc/sys/kernel/random//entropy_avail
3269
$ cat /proc/sys/kernel/random//entropy_avail
3289
$ cat /proc/sys/kernel/random//entropy_avail
3295
$ sudo systemctl start haveged
$ cat /proc/sys/kernel/random//entropy_avail
3315
$ cat /proc/sys/kernel/random//entropy_avail
3320

I took a look at the journal that - p err

output
... 
-- Reboot --
Nov 08 21:37:55 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:34:pipe A] flip_done timed out
Nov 08 21:38:05 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:34:pipe A] flip_done timed out
Nov 08 21:38:15 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 21:38:26 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:38:37 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:38:47 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 21:38:57 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:39:07 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:39:17 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out 
… 
Nov 08 21:47:48 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:47:59 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:48:05 johann-pc kdeinit5[464]: Couldn't start kglobalaccel from org.kde.kglobalaccel.service: QDBusError("org.freedesktop.DBus.Error.NoReply", "Did not receive a reply.>
Nov 08 21:48:09 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 21:48:19 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:48:29 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out 
… 
Nov 08 21:51:42 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 21:51:53 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:52:03 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:52:08 johann-pc kactivitymanagerd[513]: Couldn't start kglobalaccel from org.kde.kglobalaccel.service: QDBusError("org.freedesktop.DBus.Error.NoReply", "Did not receive>
Nov 08 21:52:13 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 21:52:23 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:52:33 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:52:38 johann-pc kaccess[471]: Couldn't start kglobalaccel from org.kde.kglobalaccel.service: QDBusError("org.freedesktop.DBus.Error.NoReply", "Did not receive a reply. >
Nov 08 21:52:43 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 21:52:55 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:53:05 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:53:15 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out 
… 
Nov 08 21:58:51 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 21:59:01 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:59:11 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:59:21 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 21:59:23 johann-pc kup-daemon[588]: Kup ist nicht aktiviert, bitte aktivieren sie es in den Systemeinstellungen. Alternativ können Sie kcmshell5 kup eingeben.
Nov 08 21:59:36 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:59:46 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 21:59:56 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out 
… 
Nov 08 22:05:16 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 22:05:26 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:05:37 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:05:41 johann-pc akonadiserver[662]: org.kde.pim.akonadiserver: "Cannot connect to agent instance with identifier 'akonadi_davgroupware_resource_0', error message: ''"
Nov 08 22:05:41 johann-pc akonadiserver[662]: org.kde.pim.akonadiserver: "Cannot connect to agent instance with identifier 'akonadi_davgroupware_resource_0', error message: ''"
Nov 08 22:05:41 johann-pc akonadiserver[662]: org.kde.pim.akonadiserver: "Cannot connect to agent instance with identifier 'akonadi_davgroupware_resource_0', error message: ''"
Nov 08 22:05:41 johann-pc akonadiserver[662]: org.kde.pim.akonadiserver: "Cannot connect to agent instance with identifier 'akonadi_davgroupware_resource_0', error message: ''"
Nov 08 22:05:41 johann-pc akonadiserver[662]: org.kde.pim.akonadiserver: "Cannot connect to agent instance with identifier 'akonadi_davgroupware_resource_0', error message: ''"
Nov 08 22:05:41 johann-pc akonadiserver[662]: org.kde.pim.akonadiserver: "Cannot connect to agent instance with identifier 'akonadi_davgroupware_resource_0', error message: ''"
Nov 08 22:05:41 johann-pc akonadiserver[662]: org.kde.pim.akonadiserver: "Cannot connect to agent instance with identifier 'akonadi_davgroupware_resource_0', error message: ''"
Nov 08 22:05:47 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 22:05:57 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:06:07 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:06:17 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out 
… 
Nov 08 22:07:49 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 22:08:03 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:08:13 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:08:21 johann-pc akonadi_davgroupware_resource[718]: Couldn't start kwalletd:  QDBusError("org.freedesktop.DBus.Error.NoReply", "Did not receive a reply. Possible causes>
Nov 08 22:08:23 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 22:08:33 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:08:44 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:08:46 johann-pc akonadi_davgroupware_resource[718]: Couldn't start kwalletd:  QDBusError("org.freedesktop.DBus.Error.NoReply", "Did not receive a reply. Possible causes>
Nov 08 22:08:54 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 22:14:29 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:14:39 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:14:49 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 22:18:39 johann-pc kcheckpass[921]: pam_tally(kde:auth): Error opening /var/log/faillog for update
Nov 08 22:18:39 johann-pc kcheckpass[921]: pam_tally(kde:auth): Error opening /var/log/faillog for read
Nov 08 22:18:39 johann-pc kcheckpass[921]: pam_tally(kde:setcred): Error opening /var/log/faillog for update
Nov 08 22:18:39 johann-pc kcheckpass[921]: pam_tally(kde:setcred): Error opening /var/log/faillog for update
Nov 08 22:19:04 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:19:14 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:19:24 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out 
… 
Nov 08 22:40:55 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
Nov 08 22:41:10 johann-pc ntpd[1992]: bind(22) AF_INET6 fe80::3d57:ce78:8695:6260%2#123 flags 0x11 failed: Cannot assign requested address
Nov 08 22:41:10 johann-pc ntpd[1992]: unable to create socket on enp0s25 (6) for fe80::3d57:ce78:8695:6260%2#123
Nov 08 22:41:11 johann-pc ntpd[1992]: bind(26) AF_INET6 fe80::3d57:ce78:8695:6260%2#123 flags 0x11 failed: Cannot assign requested address
Nov 08 22:41:11 johann-pc ntpd[1992]: unable to create socket on enp0s25 (8) for fe80::3d57:ce78:8695:6260%2#123
Nov 08 22:41:41 johann-pc kernel: [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:41:51 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
Nov 08 22:42:01 johann-pc kernel: [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
lines 506-551/551 (END)

I think the svideo-1 option isn’t solution, but let me restart to apply the recent changes of grub and havegad…
Well like expected, it hasn’t changed nothing.

But let me ask something: is it possible to install packages using chroot? Than I could try do remove the xf86-video-intel package. If graphical output is completely broken, I would know, how to reinstall the driver.


(tom) #16

this is really easy with arch-chroot, see the last posts How to start a simple systemd-nspawn container (for system rescue)

reinstall will change nothing and it’s wasted time.
when video=SVIDEO-1:d doesn’t change anything i would remove it.

since kernel 4.16 i have also massive problems and on my main notebook i stay at 4.15 but you can try the lts kernel and current is 4.4.152

$ sudo pacman -S linux-lts

linux-lts because i see no chance to solve the problem.


(Johann Schmiedehausen) #17

Okay so I will revert the changes in grub and give the Linux-lts a try this evening.

Thanks a lot for your help and attention, Tom.

With the Linux-lts all works fine. :slight_smile:

Edit: the wifi isn’t working anymore and also there is no option to suspend or hibernate the session.


(Johann Schmiedehausen) #18

For those who may have the same issue:
To install the Linux-lts I followed the instructions of this article: Why and How to install the LTS kernel in Arch Linux

To solve the not working wifi I simply removed the broadcom-wl package after verifying, that a free driver is installed (in my case b43). More info you can find here: Broadcom wireless
cheers


(system) #19

This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.